Push-to-Connect · BP Series

(copy 1)

Detailbild (copy 1)


Push-to-Connect Couplings · BP Series

Description

The brake line couplings of the BP series have been developed for use in hydraulic brake systems, as mandatory in France.

Locking of the two halves of the coupling is achieved by means of precision snap-in balls. The design of the fl at face valves guarantees an absolutely tight seal, as well as minimal loss of oil and prevention of air inclusions during coupling or uncoupling.

The design of the coupling meets the requirements of NFU 16006 and ISO 5676.

 

Working Pressure
150 bar / 15 MPa / 2175 PSI

The indicated pressure ratings only apply to the
coupling itself and depend on the connection type.

Working Temperature
-25° C ... +100° C / -13° F ... +212° F

Material
Steel

Surface Finishing
Zinc-Plating and Thick-Film-Passivation (Chrome III)

Standard Seal Material(s)
NBR (Buna-N®), PTFE

Alternative seal materials are available on request.