Flow Turbines SFM

Detailbild


Flow Turbine PPC-04/12-SFM

▪ Analogue version
▪ 5-pin connection
▪ Can be used with all analogue Hydraulic Testers of the PPC series

CAN Flow Turbine PPC-CAN-SFM

▪ CAN version
▪ 5-pin SPEEDCON connection plug

Left column (copy 2)

Technical Data

▪ Housing: Aluminium (black anodised)
▪ Gaskets: FPM (Viton®)
▪ Accuracy (at 21 cSt): ±1 (% FS*) or
  ±1 (% of the displayed value)
▪ Pressure measurement connection: SMK20 (M16 x 2)
▪ Temperature measurement connection: M10 x 1
  (standard screw plug)
▪ Calibration certificate on request
▪ UNF version on request

Ambient Conditions
▪ Media temperature: -20 °C ... +90 °C / -4 °F ... +194 °F
▪ Ambient temperature: -10 °C ... +50 °C / +14 °F ... +122 °F
▪ Storage temperature: -20 °C ... +80 °C / -4 °F ... +176 °F
▪ Permissible particle size: < 10 Micron for SFM-015
  < 25 Micron for others
▪ Viscosity range: 10 ... 100 cSt

Electrical Data
▪ Response time: 50 ms

Left column (copy 2)

Accessories

Flow Turbine (analogue):
  A PPC-04/12-CAB3 (3 m / 9.84 ft) Connection Cable is
  needed to connect the sensor to the current Hydraulic
  Testers.
  A PPC-04/12-CAB5-EXT (5 m / 16.40 ft) Extension Cable
  is also available as an option.
▪ CAN Flow Turbine:
  Connecting the CAN sensor to the CAN Hydraulic Tester
  a CAN Connection Cable and a CAN Terminating Resistor
  is needed.