Heavy Series (DIN 3015-2)

Detailbild (copy 1)


Installation of Pipes, Tubes and Components

▪ Clamp bodies with profiled inside surface and tension clearance
▪ To be used as fixed point clamp preventing the line from sliding
▪ Clearance between the clamp halves provides tension of the tube or pipe
▪ Vibration/noise reducing and impact absorbing effect towards the direction
  of the line provided by the grooves on the inside

(copy 3)

Polypropylene (PP)

(copy 5)

Polyamide (PA)

(copy 3)

Elastomer (SA)

(copy 5)

Aluminium (AL)

Installation of Hoses and Cables

▪ Clamp bodies with smooth inside surface without tension clearance
▪ Smooth inside surface and chamfered edges avoid damaging of the hose or cable
▪ To be used as guide allowing the line to slide
▪ Choose the internal diameter of the clamp body slightly smaller than the outside diameter
  of the hose or cable to use it as fixed point clamp preventing the line from sliding

(copy 4)

Polypropylene (PPH)

(copy 1)

Polyamide (PAH)

(copy 4)

Elastomer (SAH)

Installation of Pipes, Tubes and Cables

▪ Clamp bodies with individual elastomer inserts
▪ Vibration/noise reducing installation of pipes and tubes
▪ Most effective reduction of vibration and noise
▪ Extra-gentle installation of hoses or cables

(copy 3)

Polypropylene (PPR)

(copy 4)

Polyamide (PAR)

(copy 5)

Elastomer (RI)

(copy 7)

Installation of Cables

▪ Recommended for the installation of electric cables with diameters between 40 mm and 72 mm / 1.57 inch and 2.83 inch
▪ Recommended to be used with Hexagon Head Bolts AS and Cover Plate DP or Socket Cap Screw IS
▪ For varying cable diameters, only the bolt lengths need to be varied

Polypropylene
(6040-72 PP)

Polyamide
(6040-72
PA)