|
Suction Strainers SUS
STAUFF Suction Strainers SUS
Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir
Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1)
Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request
Consult STAUFF for alternative materials.
Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP)
Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F |
Options
▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids
Special sizes, designs, materials and configurations are available on request. Consult STAUFF for details. |
|