Suction Strainers SUS

(copy 1)

Left column (copy 3)

STAUFF Suction Strainers SUS

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir

▪ Available with female BSP thread (ISO 228)
  or female NPT thread (ANSI B1.20.1)

▪ Threaded end cap made of glass-fibre reinforced
  Polyamide (PA) or Aluminium
▪ Lower end cap and support tube made of Steel, zinc-plated
▪ Standard filter material is Stainless Steel Mesh (125 μm);
  alternative micron ratings of 60 μm and 250 μm on request

Consult STAUFF for alternative materials.

Media Compatibility
▪ Suitable for use with Mineral and Petroleum based    
  hydraulic fluids (HL and HLP)

Technical Data
▪ Operating temperature range:
  -20 °C ... +100 °C / -4 °F ... +212 °F

(copy 3)


▪ Integrated bypass valve with an opening pressure
  of  0,2 bar (3 PSI) to reduce the risks of high-pressure
  drops that can be caused by contaminated strainer
  elements or high-viscosity fluids

Special sizes, designs, materials and configurations
are available on request. Consult STAUFF for details.